Designed for two-ton trucks.
All-in-one LED tail lights.

Stylish design with tube LEDs. Collaborative lighting system of reverse and indicator lights.
All-in-one LED tail lights for two-ton trucks “OIRAN COMBO MINI” debut!
Great brilliance & high performance!

品番：CMWP-CRC-S2ESS
ESS対応モデル
配線の繋ぎ方を変更することで、ウインカー「流れる」「流れない」の設定が可能です。

Product number: CMWP-CRC-1
Standard model＊The winker light has three chambers with three wires. Using external relays on the market enables you to custom this light to the sequential model

Product number: CMWP-CRC-S2N
Sequential model
※Electronic relays built in. The winker light has 6 chambers and the light flows seamlessly in order, to show a direction
※＊ Please do not install this sequential mode onto the latest Super Great from Mitsubishi Fuso at the occasion of the first car inspection. This cannot meet the security standard of emergency stop signal system (ESS). This can also occur to the trucks which are not a Mitsubishi but have ESS. Please carefully check the regulation in your country. We recommend purchasing the standard model for the vehicle with ESS.
※＊ This product might fail the first vehicle inspection for safety standards due to the reason above.

OIRAN COMBO MINI

～OIRAN COMBO MINI NEW GENERATION FULL LED TAIL LAMP～
Brake & Parker light consists of 46 LEDs and tube LED.
Indicator light consists of 24 LEDs.
12 LEDs illuminate as reverse light illuminated
Adapted power source for 12V / 24V
Removable Bezel
Hyper Flash Prevention resistor is attached.
＊Vehicles attached burning-out warning lamp might need Quadruplex Resistor.
【Quadruplex Resistor (right left set)】
Product No：OERO-04
Price : 13,000 JPY

Demensions

• 395mm(W)×159mm(H)×90mm(D)
• Lens width 365mm
• Lens height 109mm

1 year warranty against water leaks and LED failures.

thermocompression bonding specification

Using theremocompression bonding prevent moisture from seeping into a tail light and improve its durability.

※This warranty covers only tail lights themselves, doesn’t cover business loss and damages.
※This warranty is only valid in Japan.

E-Mark certified

E-Mark is based on EU Directive and is a global standard safety certification mark which the European Commission require. E-Mark logo is stamped on the products which meet ECE regulations.

Component parts

• ①tail light (Left & Right)
• ②Hyper Flash Prevention resistor(Left & Right)
• ③Fixing bracket and bolt & nut for mounting on a body.
  • Two sets of 2 brackets.
  • Two sets of 2 nuts.
  • Two sets of 2 spring washers.
  • Two sets of 2 flat washers.
• ④T-Bolts and nuts for mounting on a body.
  • Two sets of 4 T-Bolts.
  • Two sets of 4 Nuts.
  • Two sets of 8 spring washers.
  • Two sets of 8 flat washers.

※Side reflector and Back reflector are not supplied.

One year warranty (only valid in Japan).

attention

Depending on types of vehicles, Burning-out warning lamp might turn on. It can be canceled by installing Quadruplex resistor (sold separately).
【Quadruplex Resistor (right left set)】
Product No：OERO-04

All LED’s on

Park Light illuminated

brake Light illuminated

Indicator illuminated

Reverse Light illuminated

Reverse and Indicator illuminated