New style All-in-one LED tail lights debut!
~Streamlined exquisite design~
A new line-up in the popular “OIRAN COMBO” series.
All-in-one typed small / brake, turn signal, back lamp
High luminance LED is used. Designed for large vehicles with its high-brightness and mighty-scale.
“OIRAN COMBO HAYATE” provides great brilliance and high performance
OIRAN COMBO –HAYATE-
~NEW GENERATION All-in-one FULL LED TAIL LAMP with Detailed Design FOR TRUCK~
High-Luminance LED is applied for each lightning place.
Adapted power source for 24V (Truck).
Sold as a pair (Left & Right).
Sequential winker is adopted!
This product meets the Japanese safety regulation for road vehicle, also fulfills the E-mark (European performance standard on the lights on vehicles certified by Economic Commission of Europe). This product has the E-11 certification which is published by United Kingdom.
You can change between the sequential mode and the standard flash mode by just adjusting the wiring setting.
Sequential Winker is adopted which has conformed to security standards since the law amendment in Japan.
You can change between the sequential mode and the standard flash mode by changing the wiring.
High-luminance LED is used.
Long life and high brightness
Thermo compression bonding method
This product is produced by the same method as the genuine tail lights. This makes the product high quality.
Width 611.5 mm×Height 218mm×Depth 126 mm
Lens Width 570mm
Lens Height 152.5mm
1 year warranty for poor lighting due to water leaks (for use in Japan only)
This product applies the same thermocompression bonding method as the genuine domestic tail lens. By adopting this method, water leakage is prevented and the durability of the product is significantly improved.
* Warranties other than the tail body (business guarantee, damage compensation, etc.) are not included.
Conformed to security standards
This product has acquired the safety standard compliant product (E mark).
E-Mark is based on EU Directive and is a global standard safety certification mark which the European Commission require. E-Mark logo is stamped on the products which meet ECE (Economic Commission of Europe) regulation. This is a worldwide quality standard certification.
Normally, Japanese aftermarket parts which are sold worldwide necessarily have this certificate.
* Depending on the number of installations, installation position, and installation method, the vehicle may not pass the inspection, so please check with the store, dealer or installation factory where you purchased the product.
The package contents of this product are as follows.
• ①tail light (Left & Right )
• ②Fixing bracket and bolt & nut for mounting on the body.
o 2 brackets×2 (Left & Right)
o 2 nuts×2
o 2 spring washers A×2
o 2 flat washers A×2
o 4 T-bolts×2
o 4 nuts×2
o 8 spring washers B×2
o 8 flat washers B×2
* Side reflectors and rear reflectors are not included, so please prepare them separately.
This product comes with a one-year manufacturer’s warranty. (For use in Japan only)
Depending on types of vehicles, Burning-out warning lamp might turn on. In such a case, it can be canceled by installing a Quadruplex resistor (sold separately).
【Quadruplex Resistor (right & left set)】
※All of OIRAN products might not meet Safety Standard because of its installing position, numbers or so on. Please check with the store, dealer or the installation factory where you purchased the product.