Integrated Tail Lights are E-Mark approved.

Stylish designed tail lights have integrated functions which are brakes, parkers and indicator lamps.
There is a line-up of the type integrated brake/parker/reverse lamp.

Product No：OCWP-CRC-4
Clear／Red・Clear
Brake/Parker Indicator
※Indicator part is composed of 3 led boards and has 3 wirings.(It can be sequential by installing third-party relays.)

※Need to use resistors to remove the error signals that may occur for vehicles with CANbus control system.

Product No：OCBP-CRC-3
Clear／Red・Clear
Brake・Parker＆Reverse lamp type

Product No：OCWP-CCC-3
Clear／Clear・Clear
Brake/Parker＆Indicator type
※Indicator part is composed of three divided led board and has 3 wirings.(It can be sequential by installing third-party relays.)

Product No：OCBP-CCC-3
Clear／Clear・Clear
Brake・Parker＆Reverse lamp type

Product：OCWP-SRC-4
Smoke／Red・Clear
Brake/Small＆Indicator type
※Indicator part is composed of three divided led board and has 3 wirings.(It can be sequential by installing third-party relays.)
※Need to use resistors to remove the error signals that may occur for vehicles with CANbus control system.

Product No：OCBP-SRC-3
Smoke／Red・Clear
Brake・Parker＆Reverse Lamp type

Product No：OCWP-SCC-3
Smoke／Clear・Clear
Brake/Parker ＆ Indicator type
※Indicator part is composed of three divided led board and has 3 wirings.(It can be sequential by installing third-party relays.)

Product No：OCBP-SCC-3
Smoke／Clear・Clear
Brake・Parker＆Reverse Lamp type

Premium quality LED

Using premium quality LED which is long life and high-brightness.

hermocompression bonding

Using thermocompression bonding gives high-quality.

Product dimensions

• 611.5 mm(Length) × 218 mm(Wide) × 120 mm(Depth)
• Lens width 570 mm
• Lens height 152.5 mm

1 year warranty against water leaks and LED failures.
thermocompression bonding specification. Using theremocompression bonding prevent moisture from seeping into a tail light and improve its durability.
※This warranty covers only tail lights themselves, doesn’t cover business loss and damages.
This warranty is only valid in Japan.

E-Mark certified

E-Mark is based on EU Directive and is a global standard safety certification mark which the European Commission require. E-Mark logo is stamped on the products which meet ECE regulations.

Component parts

• ①tail light (Left & Right )
• ②Fixing bracket and bolt & nut for mounting on a body.
  • Two sets of 2 brackets.
  • Two sets of 2 nuts.
  • Two sets of 2 spring washers.
  • Two sets of 2 flat washers.
• ③T-Bolts and nuts for mounting on a body.
  • Two sets of 4 T-Bolts.
  • Two sets of 4 Nuts.
  • Two sets of 8 spring washers.
  • Two sets of 8 flat washers.

※Side reflector and Back reflector are not supplied.

One year warranty (only valid in Japan).

※All of OIRAN products might not meet Safety Standard because of its installing position, numbers or so on.
Please check at selling agents, dealers or maintenance shops.